After writing about Airborne’s Interbike sale not too long ago (here) a friend of mine decided that she wanted to get back into cycling. What great timing on her part! With the sale price, a bike in a box showed up at her place today for the amazing price of $250! Since I am the resident bike geek in the workplace, I picked up the box on my way home from work to put together the Sabre for her, and thought I would post the build process. I am still not so sure I would call this a build, it was that easy!
The Sabre was packed amazingly well. Every important part was covered, and most if not all of the bike was tied together in one unit. There was a small accessories box that was loose in the larger bike box, that held the manual, reflectors, and two cable ferrules. This box had a small hole that had developed in transit, but nothing seemed to be missing. That would be my only complaint in the shipping category.
Once out of the box, the seat post was installed to place the bike on the rack, and I spent the majority of the build time taking off the packing material. All of the tubes of the bike were wrapped and taped, the fork was bubble-wrapped and taped, the bars were wrapped and taped; do you see a pattern yet? It was packed very well, with nothing really forgotten about. Everything went together as smoothly as possible.
One non-issue, that potentially could be an issue(Maybe?) is that the stem is installed backwards. This enables the fork to be installed during the shipping process, as the stem in the reverse position makes the bike easier to pack. This only takes an allen wrench to loosen two bolts, but I could see some folks just turning the stem around, while attached, and ending up with a fork in the wrong position. I think it would be very obvious, but some might not. I feel it should be noted though…
After the stem was spun around, I mounted the handlebars, installed the front wheel, and inflated the tires to the proper level. While the bike was still on the stand, I tested out the shifting and braking, and everything was as it should be, so pedals were installed and it was time for a test ride.
The Sabre reminded me of my first “serious” mountain bike, only the Sabre costs around $200 less! Just around 15 minutes speeding around the neighborhood, mostly due to this bike not being my size. Anyway though, in my short time with it, I walked away impressed. The shifting was spot on. The Shimano 7 speed shifters, matched to Shimano derailleurs front and back worked like a charm. I was expecting to spend most of the evening fine tuning the shifting, and I did not even have to adjust it. Flawless! The Tektro Novela disc brakes also surprised me, being a great, easy, virtually set-up free disc brake. The fork did not impress me as much as the other items, but I am used to riding a rigid steel bike, so I would probably not be the best to judge the suspension. Top all of that off with a WTB saddle, and that is a smoking deal for your first mountain bike. Well done Airborne!
If you are on the fence about buying an Airborne due to putting it together yourself, don’t be. This ended up being maybe a 30 minute investment, with most of my time removing packaging. If you are interested in this deal, you need to move fast since it is over on the 23rd. Head over to Airborne’s site here to start your adventure!
If you have ever read this blog, you know that I like a good deal. There are quite a few companies and products that really strike my fancy, but some of the best deals that I have seen comes from Airborne Bicycles. I have written about their bikes before, like here and here, and once again they are dropping the deals.
From their website today, they unleashed what I am calling “the deal of the year” when it comes to buying a new bike, all in the name of Interbike. Four of their models are now at amazingly low prices, with included shipping. With that said, lets take a look:
Sabre 26″ hardtail, $249.99
Airborne’s entry level hardtail. 21 speed drivetrain, Tektro mechanical disc brakes. This price makes me want to buy one of these for my wife.
Skyhawk 26″ hardtail, $349.99
The Skyhawk is a step up from the Sabre, offering better components and Tektro hydraulic disc brakes. The geometry is also more in line with their higher end, very successful Goblin 29er.
Wingman dirt jumper, $549.99
The Wingman has earned rave reviews from various mountain bike publications, making it one of the best bang for your buck dirt jumpers.
Delta cyclocross, $749.99
The price on this bike shocked me. I have been bike lusting for this one for some time, now it is almost impossible to pass up this offer. SRAM drivetrain, Avid mechanical disc brake cyclocross machine? Yes please. Now it’s time to convince the wife…
If any of these bikes make you as happy as I am, you need to head over to their site here soon, as this offer ends at the end of Interbike, which is the 23rd of this month.
Amazing, simply amazing.
Just keep spinning…
Photos from Airborne’s site.
Fall is an amazing time of year. Leaves start to change, the weather turns a more comfortable temperature, and most bicycle companies start unleashing the hounds of their newest models. This year has been exceptionally good, and if you are in the market for a new ride then you might be a little overwhelmed with the new options. One company that never disappoints this time of year is Salsa, which upped the fat bike ante with this guy:
The Beargrease is the new “racing” fatbike. At a very svelte 28lbs or so, this is one of the (if not the) lightest fatbikes that you can purchase. Basing this model off of their successful Mukluk, they cut all of the fancy braze-ons to save weight, and added quite the impressive parts list to achieve such a light fatty. This bike just screams to be loaded up with a frame and seat bag and head off on a long distance winter race. It also looks like it would be a ton of fun just out and about on your local loop though…
Check out their site here to read more about it.
Just keep spinning…
Photo from Salsa’s site.
For all of those not paying attention, this coming model year is going to be stellar for bicycles. Need further proof of that? Check this Cross Check:
Yes, that is a Surly Cross Check. True, not a new model. Here is the kicker; this bike is now offered as a single speed complete, set up with mountain bars! This is the Cross Check that I have always wanted to build. Well done Surly!
Be sure to check out their blog this week, they are planning on dropping new products every day.
Pic from Surly’s site, also check out what looks to be a Krampus with an even fatter front…
Airborne Bicycles, based out of Dayton Ohio, have been turning out quality bicycles for a few years now, and at a very hard to beat price point as well. Last year, their Goblin 29er hardtail won over quite a few cycling magazines with it’s quality construction, smooth ride, amazing component selection, and well under the radar price, so how do you top that? By introducing this:
From the horse’s mouth, the changes from last year:
-Tapered HT with increased rear wheel mud clearance, increased standover clearance on the 16″ frame-size.
-Tapered Reba RL fork with increased 100mm travel
-Larger 180mm rotor up front for increased stopping power and fade resistance
-New 38/24 gearing on the all new SRAM X7 crankset that offers a better gear range for climbing paired to an 11-36 cassette.
-Geax AKA 2.2 tires that roll fast on hardpack and offer outstanding grip on loose and rocky terrain
-New Selle San Marco Ponza Power Saddle
All of those added features, a sweet new paint job, all for only $50 more than last year’s model. Amazing!
Just in case you are still drooling over last year’s version, hurry over to their website here and pick it up at a discounted rate, only until they are all gone. I would suggest that you move fast.
I am loving these product releases this year, for Airborne it is only getting better. One of these days I am going to get my hands on an Airborne! Well done!
Just keep spinning…
San Diego, also known as the whale’s vagina. Also home to around 50 or so craft breweries. During my recent two weeks out west, I tried to find some of the beers that I used to really enjoy and cannot find here in Ohio. I also tried to discover some new beers to lust after once my trip was over. That was accomplished thanks to some friends who live in the quiet little mountain town of Alpine, which is just around 30 miles east of the city. Little did I know that Alpine was the home to one of the finest little breweries that is known to man. You might think that is an exaggeration, but you would be wrong. Enter the Alpine Beer Company:
Located off of I-8, on the main strip of Alpine, you will find this little gem of San Diego county. The brewery is split into two sections, which oddly there is a book store in between the two sides. The book store did look interesting, but every time that I was by the brewery they were closed, which was a good thing since I like book stores. Anyway, the first area that my friend and I walked into was the brewery sales area, which had a variety of Alpine Beer company goods, and also sells their beer directly via growlers and 22oz bottles, no sixers here.
After spending some time chatting with their friendly staff, with me basically pestering them to ship beer to Ohio, (Which was responded with, “Yeaah, that’s not going to happen”) my friend and I walked to the other side of the beer company, their brewpub.
This is where the magic happens, when it comes to beer. Everything that I had from them was delightful. Sometimes I overuse that word, but drinking their beer was downright enjoyable. First up was a bourbon barrel aged Russian imperial stout by the name of Odin’s Raven.
Odin’s Raven was an amazing beer. What I remember: The bourbon alcohol flavor hits you at the first sip, but then you are overtaken by malty chocolate tones, but not too sweet, and finishes off like a stout should. It also clocked in at around 11% ABV, which makes it a very heavy hitter. Definitely a must have from a company that is more known for their hop varieties.
Next on my plate was their Chez Monieux, which was a Belgian style Kriek. I have not had too many of this style to give a great run down, but it was a sour, tart cherry carbonated blast that had a dry wine like finish, which makes sense, since it was aged in wine barrels. Good, but not normally my thing. I was glad that I had it though.
I finished off my tasting with their Alpine Ale, and also some of their Nelson IPA, both of which were again, delightful. Add these beers to the two that I have reviewed earlier in the week, and that equals one of my new favorite breweries. Be sure to check out their website here to learn more about this fantastic company, do not miss them if you are in the San Diego region. Big thanks to my friend Jimmy for taking me to the place (And letting me stay at your house!), and my friend Thom for the recommendation!
Well done Alpine!
Fresh from the rumor mill and out into reality, Airborne Bicycles has unleashed one of their newest models with this sneak peak:
The HobGoblin is their first foray into the world of dual suspension 29ers, and what a way to lose their 29er dually virginity! Aluminum frame, tapered headtube, pressfit GXP bottom bracket, SRAM X7 components in 2×10 mode, and Rockshox lending the cush, all for around $1700. There will also be an option for another, more expensive model which will include a 15mm Maxle and SRAM XO components. If you want to start from scratch, the frame will be available for purchase as well. Damn.
Maybe its because they are based out of Ohio and I like to show state loyalty, or maybe it’s because they pump out great products at more than reasonable prices, but I think Airborne is doing something right. Supposedly there are a few more models to come out this year, I feel that it is going to be hard to top the HobGoblin.
Just keep spinning…
Photo from Airborne’s site.